Unfortunately replacement keys are not available. Your best option would be to completely replace the lock.
Since your lock has a 2.5 inch span, you most likely have our etrailer.com Hitch Receiver Lock for 2 Inch Receivers, part # e98882. Part # e98881 was designed for 2-1/2 inch receivers that are commonly found on heavy-duty trucks. If your vehicle has a 2 inch trailer hitch receiver, you will want part # e98882. When you order these, you can get multiple keys. view full answer...
I had a couple of our couplers measured, but the Bulldog Cast Head Coupler w/ Wedge Latch - 2-5/16" Ball - Adjustable Channel - 14,000 lbs # BDA256C0317 ended up being the longest one we currently carry. We do have the Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long # HR26, but the use of extenders like this will reduce your tongue weight, up to 1/3 in this case.
If you need something longer, you could also go with the Brophy Hitch Extender for 2" Trailer Hitches... view full answer...
Unfortunately, just based off of your trailer we are not going to know what the correct replacement shock absorber is. What I am going to need rather is the axle capacity on your trailer and the length of the shock absorber you're replacing.
For instance, if your shock absorber measured 13-1/2" extended, and your axle had a capacity between 3,500-lbs to 7,000-lbs, then the Lippert Heavy-Duty Replacement Shock # LC283280 would work great.
Let me know what you have and I'd be happy to... view full answer...
Yes, the 20" Wide x 18" Tall Truck Mud Flaps, # 337B2018LSP can be used as a replacement but this is the mud flap only, no hanger or hardware is included nor do we have available separately.
For a complete set-up for mud flaps including the hangers etc. I suggest the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2" Hitches, # ERT00108. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally and vertically for a custom fit on your Ford... view full answer...
I have a solution for you but you are going to need to replace the base of your B&W Companion 5th Wheel Hitch so it can fit in the OEM towing package on your new 2022 Ford F-350 Super Duty. The square shaft you are referring to only fits in B&W's turnover ball system and you can not adapt it.
If you have a slider you will need the Replacement Slider Base for B&W OEM 5th Wheel Trailer Hitch - Ford Towing Prep Package - 20K item # BWRVB3370.
If you have the 20k Companion you will want... view full answer...
To replace the bracket for your Reese Pro Series Weight Distribution system with an 800-lbs tongue weight you'll want to use the Replacement Heavy Duty Snap-Up Bracket for Reese Weight Distribution Systems # 58392. This is the bracket for systems with tongue weights 800-lbs and greater. view full answer...
Lippert Components Heavy-Duty Replacement Shock - Yellow # LC283280 are what you will need as replacement shocks. They are 8.625 inches completely compressed and 13.5 inches completely extended so under weight they likely will be right at your 11 inch measurement.
If you need replacement brackets, you can use the kit # LC281281. view full answer...
Your truck is heavy duty enough that a weight distribution system is not as needed. Would it help to some extent? Sure, but for as big of a truck you have and for how light weight your RV you'll be just fine without a WD system. Also, they do not make aluminum or lighterweight options either.
Some suspension enhancement like the SumoSpring kit part # SSR-312-54 would give you additional support to get rid of any possible sag as well as improve handling so that would be one solution that... view full answer...
We do offer the hardware needed to re-install the Curt Hitch, part # 13445 you referenced.
You just need to enter the part # RHK and then enter the hitch number # 13445 in the field on the right hand side of the page. Then select Curt from the drop-down menu and enter the quantity of hardware kits you wish to order. Click Add to Cart and you should be ready to go.
If you wish to discuss shipping cost or get other information about our products you can contact our good folks in Customer... view full answer...
I'm not sure what part you are referring to as the movable half. If you are talking about the sleeve and spring loaded clamp that fit around the hitch ball, you will need to replace the coupler. For a 2 inch ball, you will need something like the Bulldog Collar-Lok Coupler w/ High-Profile Latch - 2" Ball - 3" Channel Tongue - 5,000 lbs, # BD028382 or for the 2-5/16 inch hitch ball something like the Bulldog Collar-Lok Coupler w/ High-Profile Latch - 2-5/16" Ball - 3" Tongue - 12,500 lbs,... view full answer...
I can help you out with the replacement installation hardware for the Draw-Tite Front Mount Trailer Hitch Receiver # 65049 that fits your 2009 Ford F-250; what you will need is the following:
- Replacement Hardware Kit for Trailer Hitches # RHK.
All you need to do is click # RHK, enter "65049" in the "Hitch Item Number" box, select "Draw-Tite" from the drop-down menu, hit "Add to Cart" and you're set! view full answer...
The hitches made for your 2011 Hyundai Sonata are light-duty Class I types that have a 1-1/4-inch receiver opening. For these you will need a compatible Class I ball mount, part # 3593, which comes with a pin & clip.
If you also need a hitch ball you can use either 1-7/8-inch ball # 19256 or 2-inch ball # 19258. view full answer...
Based on the part number you provided of 26002 I was able to confirm that you have the Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 15K GTW, 1,500 lbs TW # RP66130.
For a replacement snap-up bracket you will need the Replacement Heavy Duty Snap-Up Bracket for Reese Weight Distribution Systems # 58392.
I included a video of the # 58392 for you to take a look at. view full answer...
The Curt hitch part # C11363 is designed for lighter duty vehicles like your 2013 Fiat 500 which is why it has the smaller hitch size of 1-1/4 inches. Your bike rack is designed for the larger hitch size of 2 inch which we have the adapter # HT5R for.
But you should note that when you use an adapter like this you cut the capacity of the hitch by 50 percent. So you'd be left with 100 lbs tongue weight capacity and limited to only carrying 2 bikes. view full answer...
Weight distribution system heads are HEAVY. The only solution out there that can help somewhat is the HitchGrip Carrying Tool for Weight Distribution Head Assembly # 303-HG-712 which basically grabs the ball and gives an easier handle to grab onto. It looks like in your picture I can see you have already tried this though since I see packaging for it.
I know space is typically a premium when camping but maybe a small wagon could help you get the head around and then you could use the... view full answer...
I do have weld-on, a-frame trailer couplers in which replacement parts are available but the A-Frame Trailer Coupler w/ Round Jack Hole part # CA-5280-RB is not one of them. The Demco 50-Degree A-Frame Trailer Coupler part # 12660-97SP and Bulldog Heavy-Duty Cast Head Coupler part # BD44150W0317 both have replacement coupler repair kits, the Demco Composite eZ-Latch Repair Kit part # DM6008 and the Repair Kit Fulton Wedge-Latch Cast Head Coupler part # F670801.
I recommend the Demco 50-Degree... view full answer...
It sounds like you received the Replacement Spine # Y8890278 for your Yakima HoldUp Bike Rack. For this 1-1/4 inch spine, you will want the Replacement Mounting Hardware # Y8880129. This is designed specifically for this model HoldUp rack and will work well.
This replacement kit will include the hitch bolt, washer and clip for the Yakima HoldUp bike carrier. view full answer...
The Trailboss fifth wheel hitch you have is designed to fit industry standard fifth wheel rails so for a rail kit that is compatible with it and your 2017 GMC 1500 5-1/2 foot bed you'd want the # RP50064-58 which is a custom install kit. Custom kits are much easier to install as they minimize drilling and install time.
Since you have such a short bed you will need to replace your current pin box with a Sidewinder so that you can make tight turns without interference.
You will need to... view full answer...
Go To Results